
Tetrix XQ 350 puls AC/DC W EX 8P
- TIG AC/DC inverter welder of the latest generation
- Expert 3.0 control unit with high-resolution 7'' graphic display
(no touch screen) and plain text display for selecting all
parameters and personalised setup of the control units
Procedures and functions
▪ TIG-AC/DC, TIG-DC and TIG pulse
▪ activArc and spotArc
▪ E-hand, E-hand pulse, E-hand cel, E-hand cel pulse
▪ Find out more about our high-tech TIG arcs
Your advantages
▪ Connection option for remote control and function burner
▪ flexFit housing system: many accessories and options can be
attached to the welding machine using commercially available sliding blocks
▪ LED information strip: Signals the current operating status
splash-proof IP23
▪ Temperature and speed-controlled cooling fan - lower
soiling and less noise emission, as the fan only runs at
only runs when required
▪ Power-saving thanks to high efficiency and standby function
▪ Simple, tool-free change of welding polarity
▪ Can be optionally networked via LAN or WiFi gateway with ewm Xnet software
▪ Earth fault monitoring (PE protection)
pC interface for PC300 XQ software
▪ Very good burner cooling and therefore cost savings with
torch wear parts thanks to high cooling capacity of 1500 W, powerful
centrifugal pump and 8 litre coolant tank
Technical data | |||
---|---|---|---|
Model | Tetrix XQ 350 puls AC/DC W EX 8P | ||
Welding current setting range | 3 A - 350 A | ||
Duty cycle 40 °C | 350 A / 100 % | ||
Open circuit voltage | 82 V | ||
Mains voltage (ex works) | 3 x 380 V - 400 V | ||
Mains tolerances (ex works) | -25 % to +20 % | ||
Mains frequency | 50 Hz / 60 Hz | ||
Recommended generator output | 15 .1 kVA | ||
Efficiency | 88 % | ||
Power consumption Pi | 28 W | ||
Cooling capacity at 1 l/min | 1500 W | ||
Pump pressure | 3.5 bar | ||
Tank capacity | 8 l | ||
Protection class | IP23 | ||
EMC class | A | ||
Dimensions (L x W x H) | 1152 mm x 686 mm x 976 mm | ||
Weight | 128.5 kg | ||
Standards | IEC 60974-1, -2, -3, -10 CL.A |