Plymovent - Extension slewing crane FlexMax Ø 160 - 200 (1,5 - 4,5 m) for
extraction arm KUA or EA. Incl. mounting plate, tube and hoses, see variants.

Plymovent - extraction rail ERC-5.8 (pre-assembled) and extraction rail
(parts), suitable for mounting a KUA or EA extraction arm, see variants.

Plymovent - Telescopic arm Junior LM-2 and accessories, with counterweight
based scale system. Designed for vocational schools and smaller work booths,
Ideally suited for workbenches, reach from 1 m to 2 m, see variants.

Plymovent - Economy Arm EA-H = suspended mounting (2-4 m) and EA-S = standing
mounting (2-4 m), ball bearing mounted extraction arm with spring supported
support structure, demountable hood with mesh and air control flap, see
variants.

Plymovent - UK Plymoth - suction crane; 3/4.5/6/8 m horizontal reach with
additional 3-4.6 m telescopic tube Ø 160 mm. Demountable hood with mesh and
air control flap, Incl. mounting plate, see variants.

Plymovent - SUS-5/203 suction hose (5 m) and SLE-30 extension hose 3 m with
nozzle + magnetic base, see variants.

Plymovent - Flexible suction arm MiniMan 75 white with external joints, Incl.
flexible tube with slanted nozzle and wall bracket. The arm can be rotated
360°, range 1 m to 1.5 m, see variants.

Plymovent - Flexible extraction arm MiniMan 100-W Ø 100 mm white with
external joints, Incl. round hood and wall bracket. The arm is 360°
rotatable, hanging mounting, range 1.5 m to 2.1 m, see variants.

Plymovent - Flexible extraction arm MiniMan 160 stainless steel with external
joints, Incl. round hood and wall bracket. The arm is 360° rotatable, hanging
mounting, suitable for the extraction of vapors or dusts and the food
industry, see variants.

Plymovent - FAN-28 Extraction fan 0,75 kW, 2400 m³/h free blowing; 2800 rpm,
to be used with all extraction arms,

extension cranes and stationary filter units, see variants.

Plymovent - FAN-42 RD (discharge right) / LG (discharge left) exhaust fan 1.5
kW (400V/3~/50Hz), 3000 m³/h free blowing; 2800 rpm. Recommended in
configurations of 6-8 meters or with filter unit SFD, SFS or SFE, see
variants.

Plymovent - FUA exhaust fan 0.55 - 2.2 kW (IEC motor) for direct mounting on
a KUA, LM-2 or EA exhaust arm or a filter unit, FUA-1800/2100: outlet Ø 160
mm, FUA-3000/4700: rectangular outlet, see variants.

Plymovent - exhaust fan 0.75 - 4.0 kW, (IEC motor) with round inlet and
rectangular outlet.

Plymovent - The SIF series of low-noise exhaust fans are designed for use in
centralized welding fume extraction systems or in room filtration systems, 3
kW to 22 kW.

Plymovent - Fan SIF Outdoor, The noise-reduced exhaust fans of the SIF series
are designed for use in central welding fume extraction systems or in room
filtration systems, 3 kW to 22 kW.

Plymovent - Motor starter MSA for SIF fan according to the European
standards, metal housing 400 x 400 x 200 mm, automatic start/stop device, see
variants.

Plymovent - Remote control for manual operation and with timer for MSA/SFE,
see variants.

Plymovent - Frequency converter incl. mains filter and main switch to control
the suction power of a central filter system, input signal from IF-15 or
PT-1000, protection class: IP 55., see variants.

Plymovent - Frequency converter with housing, incl. mains filter and main
switch. Suitable and recommended for use with central MDB PRO filter systems
(RS-485 cable must be ordered separately), see variants.

Plymovent - Central filter system for 4500 to 9000 m³/h, depending on the
application. Fully automatic self-cleaning filter due to RoboCleanPlus
system. Incl. filter cartridges FCC-150, cyclonic spark arrestor, see
variants.