Promotech - PRO 36 Battery cordless drill, masters up to 20 holes in 20 mm with one 10.0 Ah battery pack
Fig. may deviate
Promotech - PRO 36 Battery Cordless drill, masters up to 20 holes in 20 mm thick panels with a 10.0 Ah battery pack, see details.
PRO 36 Battery Cordless drill
The cordless drill is equipped with an LED monitoring system that displays signals in green and red colours,
to show the current machine status and provide safety information.
The control panel is equipped with so-called "vandal-proof" illuminated start/stop switches (green/red).
▪ LED monitoring system displays the current status of the machine and provides safety information
▪ LED monitoring system flashes green if insufficient adhesion is detected due to e.g. a gap or workpieces that are too
thin workpieces is detected
▪ The double guide system ensures exceptional precision and maintenance-free operation
▪ Overload protection
▪ Magnetic field sensor automatically stops the motor if the holding force is too low
▪ Magnetic field shape control (MFSC) provides maximum holding force, even on thin materials
▪ Energy Saving Base (ESB) consumes only 50% of its power when the motor is not running
▪ Innovative intelligent magnet with reduced weight
▪ LED monitoring system flashes green if insufficient adhesion is detected due to e.g. a gap or workpieces that are too
thin workpieces is detected
▪ The double guide system ensures exceptional precision and maintenance-free operation
▪ Overload protection
▪ Magnetic field sensor automatically stops the motor if the holding force is too low
▪ Magnetic field shape control (MFSC) provides maximum holding force, even on thin materials
▪ Energy Saving Base (ESB) consumes only 50% of its power when the motor is not running
▪ Innovative intelligent magnet with reduced weight
| Technical datapRO-36 Battery | |
|---|---|
| Motor speed (under load) | 300 rpm |
| Power | 450 W |
| Weight with 4.0 Ah battery | 11.5 kg |
| Maximum drilling capacity | 36 mm |
| Maximum drilling capacity | 12 mm |
| Stroke | 70 mm |
| Maximum cutting depth | 50 mm |
| Voltage | 18 V DC |
| MFSC (Magnetic Field Shape Control) | yes |
| ESB (Energy Saving Base) | yes |
| Magnetic holding force (surface with a Thickness of 25 mm and a roughness Ra = 1.25) |
866 kgf (8 500 N) |
| Magnet unit dimensions | 80 mm × 160 mm × 38 mm (3.15" × 6.3" × 1.5") |
| Min. workpiece thickness | 6 mm |
| Spindle/ Tool holder | 19 mm (3/4") Weldon |
