Schweiss-Shop - News: Aktuelles rund ums Schweißen

When welding pipes, flushing is one of the most time-consuming and
expensive processes to prevent oxidation from occurring on the inside of the pipes.
Usually, the pipe is filled with gas and continuously flushed during welding.
It seems impossible,
to use the gas only where welding takes place, where the gas is
inside the pipe follows the burner on the outside of the pipe.
Thanks to WeldingDroid's patented PurgeMaster system, this is now possible.

The PurgeMaster is for the application of pipes and tanks
from a minimum of 300 to a maximum of 10000 mm.
It works on all non-magnetic metals, with a wall thickness up to 8 mm.

Application:

WeldingDroids Purgemaster
is placed on each side of the pipe to be welded. The parts are then moved towards each other. When the parts are close enough, the magnets take over. Make sure the alignment is correct.

Highlights:

- Suitable for pipes from 300 mm to 10000 mm
- 360° wheels
- Saves up to 90 % gas
- Saves flushing time
- Easy to set up and adjust
- Minimal or no re-pickling required
- Integration with WeldingDroid X2 and WeldingDroid WS