EWM Tetrix 300 AC/DC Smart 2.0 puls 8P TM, TIG-AC/DC welding unit, portable, modular, decentralised, 8-pin connection socket, technical data see details.
15.0% Discount = € 1,070.11 Savings
(Prices incl. 19% VAT)
Delineation
- Modular TIG-AC/DC inverter welding unit, gas or water cooled
- TIG welding
- Equipped with characteristic curves for EWM activArc and EWM spotArc at no extra charge
- TIG welding with reproducible, electronic HF ignition
- TIG-Liftarc welding without HF
- Adjustable AC current form, sine, trapezoid, square wave current
- Adjustable AC frequency 30 Hz to 300 Hz
- Adjustable AC balance
- TIG average value pulses, the specified welding current is always maintained, therefore
especially suitable for welding according to welding instructions
- Adjustable pulse frequency and balance
- 2-stroke/4-stroke operation
- Reduced secondary current can be called up via burner button
- Spot welding/stitching function (spotArc / spotmatic)
- spotmatic and spotArc in direct access
- Spotmatic - save 50% of stapling time
- Upslope / Downslope adjustable
- Adjustable gas pre-flow / gas post-flow
- manual electric welding
- E-hand average pulses
- AC electrode welding
- Ideal for root welding
- Safe vertical seam welding with E-hand pulse
- Adjustable hot start current and hot start time
- Antistick function
- Adjustable Arcforce
- highlights
- Safe ignition even with long hose packages
- Gas-cooled or optionally water-cooled with cooling module cool41 U31
- Very good burner cooling and thus cost savings on burner wear parts due to
powerful centrifugal pump and 4 litre water tank (cool41 U31 cooling module)
- Energy-saving due to high efficiency and standby function
- High mains voltage tolerances and thus unrestrictedly suitable for generators
- Connection option for remote adjuster and function burner
- Trolly 35.2-2 available
- Optionally networkable with LAN or WiFi, Xnet ready
- PC interface for PC300.Net software
| Technical Specifications | |||
|---|---|---|---|
| line format | TIG / MMA | ||
| Setting range for welding current | 5 A - 300 A | ||
| Duty cycle at ambient temperature | 40 °C | ||
| 30 % | --- / 300A | ||
| 35 % | 300 A / --- | ||
| 60 % | 260 A | ||
| 100 % | 210 A | ||
| Open circuit voltage | 63 V | ||
| Mains frequency | 50 Hz / 60 Hz | ||
| Mains fuses (slow-blow) | 3 x 16 A | ||
| Mains voltage (tolerances) | 3 x 400 V (-25 % - +20 %) | ||
| Max. connected load | 11.7 kVA / 17 kVA | ||
| Recommended generator power | 15.8 kVA / 23 kVA | ||
| cos φ | 0,99 | ||
| Efficiency | 84 % | ||
| Dimensions machine, LxWxH in mm | 539 x 210 x 415 | ||
| Weight, machine | 22,1 kg | ||
| Torch connection | Dezentral | ||