Tig welding rods nickel, size: 1.6 mm Ø , 1000 mm long, PU = 5 kg ~ MTC WM.2.4155 (1,6x1000) ~ Nickel (MIG/WIG) ~ 765MTC0001 ~ Schweiss Shop

Nickel (MIG/WIG) · 765MTC0001

Tig welding rods nickel, size: 1.6 mm Ø , 1000 mm long, PU = 5 kg, DIN 1736: SG NiTi 4, material number: 2.4155, AWS/ASME SFA-5.14: ER Ni - 1, B.S. 2901, part 5: NA 32.

Fig. may deviate

Description

Welding rod/wire electrode made of nickel with particularly low carbon content for TIG or MIG welding of pure nickel for operating temperatures up to +450°C. Cold-tough up to -196°C.

Most important applications
Nickel, low alloyed nickel (Ni-semi-INi-casting), e.g. LC - Ni 99,6 (2.4061), NiMn 5 (2.4116), G - Ni 95 (2.4170) as well as joints with steel, cast steel, copper;
Plating and buffer layers

Directional analysis of the pure weld metal in %
Ni C Fe Mn Si Ti
Base 0,02 0,2 0,4 0,4 3

Special notes
Cleanliness of the workpiece in the weld area is a prerequisite for a crack-free joint. Bottom seam protection is required for thin sheets and root welds. For V- and X-welds the opening angle should be at least 70°.
TIG - Welding rod should always be guided in the protective gas area.
MIG - wire electrode should preferably be welded with pulsed arc. At high welding speeds work with a gas shield following the torch (argon shower).

Applicable shielding gases TIG and MIG
Welding argon

Questions about the product?
Seen cheaper?
Directly into the shopping cart
Back
These articles have been seen

© 2024 - schweiss-shop.de

admin